Quick Answer

Make separate controlled records for E6013 and E6010, even if both are covered carbon steel SMAW electrodes. Put classification and required AWS edition, manufacturer, trade name and item code at the top. Add size-specific operating data from the proposed product, pack and traceability fields, and required documents. Mark unknown values for supplier confirmation, then approve samples and tie each purchase order to the sheet revision.

Key Takeaways

• An AWS classification does not identify a manufacturer’s trade product or saleable SKU.
• Current and polarity ranges must be obtained for the named product and diameter.
• A typical product-sheet test result is not a lot-specific certificate.

Which Identity Fields Belong at the Top?

State SMAW covered carbon steel electrode, classification E6013 or E6010, and the applicable AWS A5.1/A5.1M edition required by the customer. The 2025 publication is an example, not a substitute for the tender’s named edition.

Keep the importer’s item code, manufacturer’s legal identity, trade name, plant and manufacturer SKU in distinct fields. Record intended market and application without claiming that the sheet itself qualifies a welding procedure.

Add document owner, revision and issue date. The purchase order should identify the approved revision rather than an undated catalog printout.

Which Operating Fields Must Be Product-Specific?

Identify E6013 as a rutile-type and E6010 as a cellulosic family, then request the maker’s exact covering description and use limits.

Record allowed current and polarity by diameter, machine needs, positions and vertical-travel restrictions. ESAB Weld 6013 lists AC/DC+ and excludes vertical down; a Lincoln 6013 sheet lists AC, DC- and DC+.

General guides associate E6010 with DC+, but Fleetweld 5P also publishes DC- options for some diameters. Do not transfer either maker’s values to an unnamed rod.

Mark missing machine guidance “supplier to confirm.” Request minimum AC open-circuit voltage only where the exact product specifies it.

Which Sizes, Performance Data and Documents Belong on the Sheet?

List nominal core diameter and electrode length by SKU. If coated outside diameter matters for tooling or cartons, request it as a separate measured dimension.

Include net electrode weight per pack, packs per carton, label language, carton lot code and storage instructions for the offered product.

Separate classification minima from typical deposited-weld-metal values and any lot reports. Request the current technical sheet, safety data sheet, conformity declaration and product-specific approvals as the project requires.

Approve actual sample packs and markings; do not reuse another maker’s approval badge or universal baking instruction.

How Can a New Importer Approve the Sheet?

Send a controlled draft to candidate suppliers and ask them to mark compliance, exception and documentary source per field. Evaluate any deviation before changing requirements.

RFQ checklist:

1. Classification, standard edition and revision: give all bidders the same technical target.
2. Manufacturer, trade name, SKU and source plant: identify the proposed product.
3. Core diameter, length and pack format: compare the same sellable configuration.
4. Product-specific current and positions: establish machine and procedure compatibility.
5. Documents, markings and lot code: enable inspection and traceable resale.
6. Sample, change and damage rules: link approval to delivery and define exceptions.

Request representative packs for each planned diameter before approving bulk production.

Buyer FAQ

Can E6013 and E6010 share one specification?

Use separate controlled records or clearly separate class-specific rows and approvals.

Does nominal diameter include flux coating?

It normally identifies the metal core; specify coated outside diameter separately if needed.

Does a technical sheet certify each shipment?

No. Ask for lot-related proof when the customer requires it.

Inquiry: Send target market, required sizes, pack plan and procedure details through your usual inquiry channel for an itemized offer.