Quick Answer
E6013 and E6010 cannot be substituted for each other in an approved WPS without formal engineering evaluation and procedure qualification under the governing code. Although both share the 60 ksi tensile prefix under AWS A5.1, rutile E6013 and cellulosic E6010 differ fundamentally in arc force, penetration depth, electrical requirements, and qualified pass sequence. Treat any proposed swap as an essential technical change.
Key Takeaways
- Shared 60 ksi tensile classification does not establish interchangeable operating behavior.
- Filler metal classification or F-number changes typically represent essential variables under welding codes.
- A successful sample weld cannot widen a qualified WPS without formal engineering approval.
Why Are E6013 and E6010 Not Direct Substitutes?
Both electrodes are carbon steel classifications defined under AWS A5.1/A5.1M, sharing a minimum 60 ksi tensile strength prefix. However, E6013 uses a rutile-based flux coating yielding a soft arc and shallow to medium penetration for general fabrication, as demonstrated by Lincoln Fleetweld 37.
Conversely, E6010 utilizes a high-cellulose sodium coating producing a forceful, deeply penetrating arc engineered for open-root pipe passes and contaminated steel, as shown by Lincoln Fleetweld 5P. Furthermore, E6010 operates on DC+ power, whereas E6013 operates across AC and DC supplies depending on the specific brand formulation.
| Characteristic | AWS E6013 (Rutile coating) | AWS E6010 (Cellulosic coating) |
|---|---|---|
| Flux coating and arc force | Rutile-based; gentle arc, medium penetration | High-cellulose sodium; forceful, deep penetration |
| Power source and polarity | AC, DC+, DC- (brand-specific operating data) | Direct current electrode positive (DC+) primary |
| Typical qualified WPS role | Light structures, sheet steel, cosmetic cover passes | Open root passes, cross-country pipe joints |
What Does the Approved WPS Actually Permit?
Examine the signed Welding Procedure Specification (WPS) and its supporting Procedure Qualification Record (PQR). Identify whether the document specifies a generic AWS classification, a restricted F-number group, or a proprietary manufacturer brand name. Check qualified base-metal thickness ranges, joint geometry, and required pass sequence.
Technical authorities such as TWI’s welding procedure guidance note that welding approvals govern controlled parameters where essential variable changes require formal requalification. If a procedure is qualified strictly with E6010, purchasing staff cannot substitute E6013 based on catalog claims or commercial pricing.
Which Checks Should a Buyer Complete Before Ordering?
Establish why an alternative consumable is being considered—such as local stock shortages, machine output limitations, or cost differences. Request the exact manufacturer trade name, classification certificate, diameter, and technical operating sheet for the candidate product.
Confirm whether the project specification allows consumable alternatives under engineering review. Obtain written sign-off from the project welding engineer or responsible inspector prior to placing purchase orders, and verify whether the qualification covers the root pass, fill passes, or the entire completed joint.
How Should the RFQ and Quote Handle Alternatives?
RFQ checklist:
- Approved WPS number, revision, and code edition: lock the contract baseline.
- Qualified AWS classification and core diameter: prevent unauthorized substitutions.
- Specific joint and pass designation: distinguish root pass from fill or cap requirements.
- Separate quote line for proposed alternates: require explicit engineering review.
- Dated technical datasheet and mill test certificates: verify actual product data.
- Batch traceability and carton labeling rules: prevent unapproved mixing on site.
Buyer FAQ
Can E6013 replace E6010 on an open-root pipe weld?
No. E6013 lacks the penetrating arc force required for open-root keyhole welding.
Does matching 60 ksi tensile strength allow direct substitution?
No. Coating type, penetration, polarity, and code F-numbers are essential procedure variables.
Can a welder make the substitution on site?
No. Any consumable change requires formal engineering review and WPS documentation.
Inquiry: Share your qualified WPS details, governing construction code, joint drawings, and required test documentation through your established inquiry route for technical review and quotation.

Request a Wholesale Quote:Whatsapp : (+86 15632245103) E-mail : ganzhedao@gmail.com